3 connector j2 – jtag (amd embedded probe), Connector j2 – jtag (amd embedded probe), Connectors j3 and j4 – so-dimm ddr3 memory sockets – Kontron COMe-cOHXX User Manual
Page 43: Table 8. j5 jtag connector pin-out
Kontron COMe-cOH2/COMe-cOH6 User’s Guide
www.kontron.com
38
4
V_V5
4.1.3
Connector J2 – JTAG (AMD Embedded Probe)
J2 is a 22-pin flat foil connector (FFC) used to support the AMD Embedded
Probe Header interface definition.
NOTE: A cable adapter must be used to connect a Sage debugger tool to the
debug connector.
Table 8. J5 JTAG Connector Pin-Out
Pin
Name
1
GND1
2
DBRDY
3
GND2
4
TDO
5
GND3
6
TDI
7
GND4
8
TMS
9
GND5
10
TCK
11
GND6
12
DBREQ
13
PWRBTN
14
1.8V
15
SYSRST#
16
GND7
17
LDTRST#
18
GND8
19
SCLK
20
GND9
21
SDAT
22
GND10
WARNING: The debug port is for internal use only. Do not connect any devices.
4.1.4
Connectors J3 and J4 – SO-DIMM DDR3 Memory Sockets
This design supports up to 8 GBytes (single channel, 4 GBytes each) of DDR3
memory.