Connector j1 – fan, Connectors j2 and j3 – so-dimm ddr3 memory sockets – Kontron COMe-cTH6 User Manual
Page 29
23
COMe-cTH6 User’s Guide
www.kontron.com
- CP
Figure 4: Onboard Connectors
4.1.2 Connector J1 – Fan
J1 is a connector for 3-wire fan control. See Section 7.3, “Onboard Fan Connector” for more detailed information.
Pin
Name
1
CPU_FAN_TACH_C
2
CPU_FAN_VCC
3
CPU_FAN_GND
Table 6: J1 Fan Connector Pin-Out
4.1.3 Connectors J2 and J3 – SO-DIMM DDR3 Memory Sockets
This design supports up to 16 GBytes (two single channels, 8 GBytes each) of non-ECC, unbuffered SO-DIMM DDR3
memory. The R-series CPU has two 204-pin, keyed, SO-DIMM sockets, J2 and J3.
J1 – Fan Connector
J4 – JTAG Connector
(AMD Embedded Probe)
J2, J3 – SO-DIMM DDR3 Memory Sockets
DRAFT COPY FOR REVIEW ONLY
DRAFT COPY FOR REVIEW ONLY