Kontron SMARC-sAMX6i - Manual (Page 15)

SMARC-sAMX6i / Product Specification
3.5 Electrical Specification
3.5.1 Supply Voltage
Following supply voltage is specified at the SMARC™ connector:
VCC: 3.0-5,25V
RTC: 2.5V - 3.3V
3.5.2 Power Supply Rise Time
» The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.
» There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point
3.5.3 Supply Voltage Ripple
» Maximum 100 mV peak to peak 0 – 20 MHz
15