Kontron CP-ADAP-P47-PB (6U) - Manual (Page 8)

PD17: CP-ADAP-P47-PB (6U) CPCI Backplane
Page 8 © 2003 PEP Modular Computers GmbH RID 24229 PD17, Rev. 01
4.3 MSD Connector JP3/4 (Optional)
Two 4-contact female connectors can be installed on the backplane for the connection of
mass storage devices (drives) to the +5V/+12V
power supply of the bus.
Figure 5: Orientation and Pinout of the MSD Connectors JP3/4
4.4 System Management Connector JP19/20
Two five-contact male system management bus (IPMB0/1) connectors, JP19/20, are provided
for external interfacing to this bus.
Figure 6: Orientation and Pinout of the IMPB0/1 Connectors JP19/20
1
2
3
4
Table 6: Pinout of the JP3/4
Connectors
Pin Function
1 +12V
2 GND
3 GND
4 +5V
1
5
Table 7: Pinout of Connectors JP19/20
Pin Function
1 IMPB0_SCL
2 GND
3 IMPB0_SDA
4 IMPB0_PWR
5 SMB_ALERT