Kontron CP-ADAP-P47-PB (3U) - Manual (Page 8)

PD14: CP-ADAP-P47-PB (3U) CPCI Backplane
Page 8 © 2003 PEP Modular Computers GmbH RID 24229 PD14, Rev. 01
4.3 MSD Connector JP3 (Optional)
One 4-contact female connector can be installed on the backplane for the connection of mass
storage devices (drives) to the +5V/+12V
power supply of the bus.
Figure 5: Orientation and Pinout of the MSD Connector JP3
4.4 System Management Connector JP19 (Optional)
One five-contact male system management bus (IPMB0) connector, JP19, can be provided
for external interfacing to this bus.
Figure 6: Orientation and Pinout of the CP3-BP8-P47-RIO IMPB0 Connector JP19
1
2
3
4
Table 6: Pinout of the JP3
Connector
Pin Function
1 +12V
2 GND
3 GND
4 +5V
1
5
Table 7: Pinout of CP3-BP8-P47-
RIO IMPB0 Connector JP19
Pin Function
1 IMPB0_SCL
2 GND
3 IMPB0_SDA
4 IMPB0_PWR
5 SMB_ALERT