Kontron CP3-BP8-M - Manual (Page 8)

PD04: CP3-BP8-M CPCI Backplane
Page 8 © 2002 PEP Modular Computers GmbH RID 24229 PD04, Rev. 01
5.3 Fan Connector
The backplane is equipped with the lockable Molex male connector JP4 for the connection of
fans to the 12V power supply of the bus.
Figure 5: Orientation and Pinouts of CP3-BP8-M Connector JP4
5.4 MSD Connectors
Two 4-pole Molex male connectors are equipped on the backplane for the connection of mass
storage devices (drives) to the +5V/+12V
power supply of the bus.
Figure 6: Orientation and Pinouts of CP3-BP8-M MSD Connectors
2 1
Table 3: Pinouts of CP3-BP8-M Connector
JP4
Pin Function
1 GND
2 +12V
1 2 3 4 1 2 3 4
Table 4: Pinouts of CP3-BP8-M
MSD Connector
Pin Function
1 +12V
2 GND
3 GND
4 +5V
Legend:
These connectors are available optionally.