Slide rails accessories and assembling, Fig. 30: assembling the “telescopic rail” set – Kontron KISS 1U Short KTQM77 Users Guide User Manual
Page 30
Advertising
11. Slide Rails (Option)
KISS 1U Short – User’s Guide (V1.10)
11.1.1. Slide Rails Accessories and Assembling
The “Slide Rails” set consists of following elements:
One pair of slide rails
One pair of short front brackets (with screws and washers)
One pair of long rear brackets (with screws and washers)
2x bar nut kits
8x M4x6 flathead screws
For assembling refer to Fig. 30.
Fig. 30: Assembling the “Telescopic Rail” set
Short brackets are usually used at the front of the chassis and long brackets at the rear.
28
www.kontron.com
Advertising