Kontron KISS 2U X9SCM Low profile - Manual (Page 34)

8. Installation and Removal KISS 2U V2 – User's Guide (Version 1.00)
For KISS 2U V2 system configuration with motherboard for low-profile expansion cards, is not necessary the card cage to
remove when installing the expansion cards.
8.3.1.2.
Installing /Removing Low-Profile Expansion Cards into 2U V2 with Motherboard
To install or remove low profile expansion card in system configuration with motherboard proceed as follows:
1. Open the system as described in the subsection 8.3.1.1 (step 1-4).
2. Unscrew the fastening screws of the slot bracket or card slot bracket (Fig. 30, pos. 6). Retain the screws for later use.
3. Insert/remove the expansion card/s in respectively out from the expansion slot/s of the motherboard and fix them, or
the slot bracket/s to the rear of the card cage .
4. Close the system and secure the cover with the knurled screws as described in the section 8.2 “Cover”.
32 www.kontron.com