Installation overwiew, Removing the hdd tray from the enclosure – Kontron KISS DA335 User Manual
Page 10
Advertising
5. Installation Overwiew
SATA II HDD Canister KISS DA 335
5.
Installation Overwiew
.1. Removing the HDD Tray from the enclosure
. Press the latch to the right by the thumb.
2.
orefinger at the same time.
3.
to the tray by using four mounting screws shown as below.
: Bottom view of HDD tray
Slide the HDD tray into drive slot
5. Repeat step 1 to 5 for all remaining HDD trays.
Warning
Before you remove or install the unit, make sure the unit is not turned on or connected to the AC power.
5
1
Pull the tray door outward by the f
Pull the HDD tray from the bay gently.
4. Secure the HDD
Fig. 3
until the handle is locked.
www.kontron.com
9
Advertising