Kontron TMLREK01 - Manual

TMLREK01 Rail Enabling Kit
June 2009 Intel Rail Kit Enabling for Kontron Communications Rackmount Servers
Order Number: K00032‐001 Installation Guide, rev. 1.0
1
Intel Rail Enabling Kit for
Kontron Communications Rackmount Servers
TMLREK01
This kit provides a method for enabling the use of the Intel rail kits AXXBASRAIL13
and AXXHERAIL2 with a Kontron Communications Rackmount Server. Please
consult the Intel kit instructions where indicated.
Resources
 Basic Rail Kit Install Guide for Intel Server Chassis for the basic rail kit AXXBASRAIL13 is
included in the kit or as of June 2009 can be found online on Intel’s website.
 Rail Kit Installation sheet for the rail kit AXXHERAIL2 is included in the kit only.
Tools and supplies needed
 3/8-inch hex driver or wrench
 #2 Phillips screwdriver
Contents of the kit
This package contains 10 TMLREK01 kits in an overpack (10 kits per box). Each kit contains:
 Four hex head shoulder screws
 Two #10-32 x 3/8” screws
 Two rack mounting ears
Note: The installation instructions apply to both 1U and 2U servers.