Kontron KTAM3874-pITX - Manual (Page 9)

KTD-S0051-D Page 5 Specifications
KTAM3874/pITX User's Guide
Onchip PCI Express ® Port
Single mini PCIe ® port with single lane at 5 GT/s complies with specification rev. 2.0
Onchip High Definition Video Processing Subsystem
Two independent display controllers support 2D/3D graphics rendering (SGX530 3D engine)
OpenGL ® ES 1.1/2.0, Direct3D mobile and OpenVG 1.0 support
HDMI ® 1.3a compliant transmitter up to 162 MHz (max. 1920x1080 pixel)
Low Voltage Differential Signaling (LVDS) panel interface (based on DVO output) supports
18/24 bit color depth with a maximal resolution of 1920x1080 pixel
Onchip Serial-ATA ® Controller
Complies with Serial-ATA ® specification rev. 1.0a (1.5 Gb/s) and 2.0 (3 Gb/s)
The controller supports AHCI specification rev. 1.1
Onchip Dual CAN Modules
Support for CAN protocol rev. 2.0 part A, B
The module RAM allows a storage of 64 messages
Onchip Audio Subsystem
Codec interface realize the Inter-IC Sound (I 2 S) specification
The audio codec supports a maximal resolution of 24 bit with 96 kHz sample rate
Onchip SD/MMC Controllers
1/4/8 bit data bus width
Supports FIFO and DMA mode access
One controller is reserved for the onboard e.MMC flash drive
The second controller supports only a microSD TM slot
Supports SDMEM/SDIO specification V2.0 up to 48 MHz interface speed
Supports MMC specification V4.3 up to 48 MHz interface speed
Onchip Serial Interfaces (UARTs)
One UART interface is software configurable as RS232C or RS422/RS485
USB Hub (USB connection): SMSC ® USB2514B
Four additional USB 2.0 (EHCI) ports (one for the mini PCI Express ® connector)
Supports also USB 1.1 low and full speed devices