Lifesmart LS-IQH-DMICRO - Manual (Page 10)

10
OPERATING INSTRUCTIONS
1. Turn the heater on or off by pressing the Master
Power Switch located on the side of the unit (B) to
the I position.
Once the power is off, the heating elements and fan
will stop working. This is a normal function.
1
C
2. Select a fan speed setting by pushing the Speed
Button on the control panel (C) to toggle between the
two fan speed settings high and low.
2
C
3. Set the thermostat by pressing the arrows on the
control panel (C).
You can set the temperature on the heater anywhere
between 60°F and 90°F. Once you have chosen the
desired temperature, the heater will remain on until
the room temperature increases to the temperature
on the digital display. The heater will cycle on and off
to maintain the desired room temperature.
3
C
4. To set the timer power off, start the unit and press the
Timer button on the control panel (C).
Note: The timer-power-off function can only be set
when the heater is in power-on mode .
Press the Timer button repeatedly to change the
number value between a range of 0 to 9 hours (in
1-hour intervals).
4
C