Lifesmart LS-IQH-MICRO - Manual (Page 8)

8
PREPERATION
Plug into a grounded 120 V, 60 Hz power outlet and turn on the power switch on the side of the unit .
Only operate heater in upright position .
Please note that infrared heaters do not heat like a traditional space heater . You should not expect
infrared heaters to blow hot air like a traditional space heater . Infrared heaters heat objects not air .
Infrared heaters are intended to supplement an already heated, insulated room . Square footage
specifications assume a single enclosed room not an entire home . Infrared heaters do not heat
through walls, floors, and are not intended to replace a main heat source . Infrared heat can take at
least 24 hours to warm a room but operate much more efficiently to maintain the desired temperature .
Infrared heaters will not work well in uninsulated unheated spaces like screened in porches, RV’s,
garages, unheated basements, etc .
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The heater does not
turn on . 1 . The heater is not plugged in .
2 . The power switch is not on .
3 . The electricity at the main fuse box is
not working .
1 . Plug the heater into a dedicated outlet .
2 . Flip the master power switch to the on
position .
3 . Check the electricity at the main fuse box .
If the unit shuts down 1 . There was a power outage .
2 . The unit overheats .
1 . Turn the power switch to off then turn power
switch to on .
2 . Unplug the unit and wait 5-10 minutes, then
plug in and turn power switch to on .