Lifesmart S-2PC-1000B - Manual (Page 11)

11
OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing the
Power button on the remote control (B) .
Once the power is off, heating elements will stop
working first . The fan will continue working for up to 3
minutes to dispense residual heat inside the heater .
This is a normal function .
1
Power Power
C B
2 . Set the thermostat by pressing the arrows on the
control panel (C) or the remote control (B) .
You can set the temperature on the heater anywhere
between 59°F and 86°F or between 15°C and 30°C .
Once you have chosen the desired temperature,
the heater will remain on until the room temperature
increases to the temperature on the digital display .
The heater will cycle on and off to maintain the
desired room temperature .
Press the °C/°F button on the remote control (B)
to switch the digital display indicator on the heater
between Fahrenheit and Celsius .
2
C
B
TEMP.
DOWN TEMP.
UP
TEMP.
DOWN TEMP.
UP
OR
B ºC/ºF