Losi LOSB9530 - Manual (Page 5)

Quick Programming Card
The supplied Quick Programming Card (QPC) is used to setup the Electronic Speed
Control to your operating requirements.
The following parameters can be set:
• Voltage Cut-off – select between NiMH or 2-cell LiPo battery setting.
Note: Selecting the NiMH setting for your LiPo battery will
result in damage or fire.
• Brakes
- Soft (wheels will not lock up).
- Normal (strong enough to lock wheels under braking).
• Reverse
- YES Provides forward braking action with the ability to reverse after
pausing for 2 seconds after braking.
- NO When selected allows forward and braking without ability to
reverse.
Instructions for Losi Xcelorin 36 th Electronic Speed Control Page 5 of 8