Losi LOSB9563 - Manual (Page 8)

LOSB9535 Xcelorin Electronic Speed Control v1.1 Page 8
Using the Advanced Quick Programming Card
With the AQPC in your hand and the back facing you, notice the small jumper
connectors. The jumpers are used to indicate which function you want to
activate.
To change the settings rearrange the small jumpers to the desired settings.
To Upload to the ESC do the following:
1. Ensure the transmitter and vehicle are turned off.
2. Make sure a battery pack is installed that has some charge in it.
3. Connect the battery to the vehicle.