Losi LOSB9567 - Manual (Page 33)

LOSB9501 Xcelorin Electronic Speed Control v1.0 Page 33
When using any Lithium or M1 (A123) batteries, they must not be discharged to less
than 3.0V per cell.
• No Cutoff The choice is not available and NOT recommended when using any
type of Lithium battery.
• Customize Voltage Cutoff (for Lithium Batteries) after selecting the number of cells
(2 or 3) the default voltage is displayed. For example, you select a 2S or 2-cell
battery; the default cutoff voltage will be 6.0V. You may raise this to protect your
expensive batteries in 0.1V increments up to 7.0V. For 3S or 3-cell, the default cutoff
is 9.0V and you may increase this up to 10.5V.
Brake/Reverse – This defaults to Forward with Reverse for crawler use and
cannot be changed.
Throttle Limit – Use this to limit the power available using forward throttle.
The lower the percent the less forward throttle speed will be available.
(Default)
• 0% 100% of forward speed • 50% 50% of forward speed
• 10% 90% of forward speed • 60% 40% of forward speed
• 20% 80% of forward speed • 70% 30% of forward speed
• 30% 70% of forward speed • 80% 20% of forward speed
• 40% 60% of forward speed • 90% 10% of forward speed