Mercedes-Benz C-Coupe 2015 Owners Manual - Manual (Page 203)

R Calling up display messages
(
Y
page 208)
R
Checking the tire pressure electronically
(
Y
page 309)
R Calling up the service due date
(
Y
page 276)
Settings menu
Introduction
In the Settings Settings menu, you have the following
options:
R
Changing the instrument cluster settings
(
Y
page 201)
R Changing the light settings (
Y
page 201)
R Changing the vehicle settings
(
Y
page 203)
R
Changing the convenience settings
(
Y
page 203)
R Restoring the factory settings
(
Y
page 204)
Instrument cluster
Selecting the unit of measurement for dis-
tance
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X Press the = or ; button on the steer-
ing wheel to select the Settings Settings menu.
X
Press the : or 9 button to select the
Inst. cluster Inst. cluster submenu.
X
Press a to confirm.
X Press the : or 9 button to select the
Display unit Speed-/odometer Display unit Speed-/odometer func-
tion.
You will see the selected setting: km km or
Miles Miles .
X Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R Digital speedometer in the Trip Trip menu
R Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R Navigation instructions in the Navi Navi menu
R Cruise control
R DISTRONIC PLUS
R
ASSYST PLUS service interval display
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the steer-
ing wheel to select the Settings Settings menu.
X
Press the : or 9 button to select the
Instrument Cluster Instrument Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display: Permanent Display: function.
You will see the selected setting Outside Outside
Temperature Temperature or Additional Speedome‐ Additional Speedome‐
ter [km/h] ter [km/h] / Additional Additional Speedometer Speedometer
[mph] [mph] .
X
Press the a button to save the setting.
i The speed is highlighted in km/h or in
mph conversely to your speedometer.
Lights
Switching the daytime running lamps on/
off
Daytime running lamps are required by law
(Canada only). You cannot set the "daytime
running lamps" function via the on-board
computer.
Menus and submenus
201
On-
boar
d
comp
ut
er
and
dis
pla
ys
Z