Ope ni ng and cl os in g, Sliding sunroof (coupe) – Mercedes-Benz E-Cabriolet 2015 User Manual

Page 115

Advertising
background image

X

To open and close: turn the SmartKey to

position 1 or 2 in the ignition lock.

X

Press or pull the 3 switch in the corre-

sponding direction.

i

If you press the 3 switch beyond the

point of resistance, an automatic opening/

closing process is started in the corre-

sponding direction. You can stop automatic

operation by operating the switch again.

Operating the roller sunblind for the

panorama roof with power tilt/sliding

panel

Important safety notes

G

WARNING

When opening or closing the roller sunblind,

parts of the body could be trapped between

the roller sunblind and the frame or sliding

sunroof. There is a risk of injury.
When opening or closing make sure that no

parts of the body are in the sweep of the roller

sunblind.
If somebody becomes trapped:

R

release the switch immediately, or

R

during automatic operation, push the

switch briefly in any direction

The opening or closing procedure will be stop-

ped.

The roller sunblind shields the vehicle interior

from sunlight. The roller sunblind can only be

opened and closed when the panorama roof

with power tilt/sliding panel is closed.

Roller sunblind reversing feature

The roller sunblind is equipped with an auto-

matic reversing feature. If a solid object

blocks or restricts the roller sunblind during

the closing process, the roller sunblind opens

again automatically. The automatic reversing

feature is only an aid and is not a substitute

for your attentiveness to the roller sunblind

while it is closing.

G

WARNING

The reversing feature especially does not

react to soft, light and thin objects such as

small fingers. This means that the reversing

feature cannot prevent someone being trap-

ped in these situations. There is a risk of

injury.
When closing make sure that no parts of the

body are in the sweep of the roller sunblind.
If somebody becomes trapped:

R

release the switch immediately, or

R

during automatic operation, push the

switch briefly in any direction

The closing process is stopped.

Opening and closing

Overhead control panel
:

To open

;

To open

=

To close

X

Turn the SmartKey to position 1 or 2 in the

ignition lock.

X

Press or pull the 3 switch in the corre-

sponding direction.

i

If you press or pull the 3 switch

beyond the point of resistance, an auto-

matic opening/closing process is started

in the corresponding direction. You can

stop automatic operation by pressing or

pulling again.

Sliding sunroof (Coupe)

113

Ope

ni

ng

and

cl

os

in

g

Z

Advertising
This manual is related to the following products: