Mercedes-Benz S-Class 2014 COMAND Manual - Manual (Page 45)

Connecting a device via WPS PIN
Prerequisite:
For this type of connection, the device to be
connected must support "Connect using WPS
PIN".
X To select Vehicle Vehicle in the main function bar:
turn the controller and press to confirm.
X
To switch to the menu bar: slide V¬ the
controller.
X Select System Settings System Settings .
The system settings menu is shown.
X Select WiFi WiFi .
The WLAN menu appears.
X Select Connect Via WPS PIN Connect Via WPS PIN .
X Select the vehicle from the device to be
connected and "Connect using WPS PIN".
The vehicle is displayed with the SSID MB MB
WLAN XXXXX WLAN XXXXX .
The device to be connected generates a
PIN.
X
This PIN is also entered on COMAND.
Connecting the device by pressing a
button (push button)
Prerequisite:
For this type of connection, the device to be
connected must support "Connect via push
button".
X To select Vehicle Vehicle in the main function bar:
turn the controller and press to confirm.
X
To switch to the menu bar: slide V¬ the
controller.
X Select System Settings System Settings .
The system settings menu is shown.
X Select WiFi WiFi .
The WLAN menu appears.
X Select Connect via WPS PBC Connect via WPS PBC .
X
Select the vehicle from the device to be
connected and "Connect via WPS PBC".
The vehicle is displayed with the SSID MB MB
WLAN XXXXX WLAN XXXXX .
X Select Continue Continue on COMAND.
Connecting the device via SSID and
security key
Example display
X To select Vehicle Vehicle in the main function bar:
turn the controller and press to confirm.
X To switch to the menu bar: slide V¬ the
controller.
X Select System Settings System Settings .
The system settings menu is shown.
X Select WiFi WiFi .
The WLAN menu appears.
X Select Connect Using Security Key Connect Using Security Key .
X Select the vehicle from the device to be
connected. The vehicle is displayed with
the SSID MB WLAN XXXXX MB WLAN XXXXX .
WLAN
43
Syst
em
set
tin
gs