Breakdown assista nce, Fuses – Mercedes-Benz M-Class 2013 Owners Manual User Manual

Page 396

Advertising
background image

As soon as the vehicle is loaded:

X

Prevent the vehicle from rolling away by

applying the electric parking brake.

X

Shift the automatic transmission to

position P.

X

Turn the SmartKey to position 0 in the

ignition lock and remove it.

X

Secure the vehicle.

Information on 4MATIC vehicles

!

Vehicles with 4MATIC must not be towed

with either the front or the rear axle raised,

as doing so will damage the transmission.

If the vehicle has transmission damage or

damage to the front or rear axle, have it

transported on a transporter or trailer.
In the event of damage to the electrical

system
If the battery is defective, the automatic

transmission will be locked in position P. To

shift the automatic transmission to position

N, you must provide power to the vehicle's

electrical system in the same way as when

jump-starting (

Y

page 389).

Have the vehicle transported on a transporter

or trailer.

Recovering a vehicle that has become

stuck

!

Pull away smoothly, slowly, and in a

straight line when pulling out a vehicle that

has become stuck. Excessive tractive

power could damage the vehicles.

If the drive wheels get trapped on loose or

muddy ground, recover the vehicle with the

utmost care, especially so if the vehicle is

laden.
Never attempt to recover a vehicle with a

trailer attached.
Pull out the vehicle backwards, if possible,

using the tracks it made when it became

stuck.

Tow-starting (emergency engine

starting)

!

Vehicles with an automatic transmission

must not be tow-started. You could

otherwise damage the automatic

transmission.

You can find information on "Jump-starting"

at (

Y

page 389).

Fuses

Important safety notes

G

WARNING

Only use fuses that have been approved for

Mercedes-Benz vehicles and that have the

correct fuse rating for the systems

concerned. Do not attempt to repair or bridge

faulty fuses. Using fuses that have not been

approved or attempting to repair or bridge

faulty fuses could cause the fuse to be

overloaded and result in a fire. Have the cause

traced and rectified at a qualified specialist

workshop.

!

For the fuse boxes in the engine

compartment and under the rear bench

seat, only use fuses with the suffix "S".

Otherwise, components or systems could

be damaged.

The fuses in your vehicle serve to close down

faulty circuits. If a fuse blows, all the

components on the circuit and their functions

stop operating.
Blown fuses must be replaced with fuses of

the same rating, which you can recognize by

the color and value. The fuse ratings are listed

in the fuse allocation chart.
If a newly inserted fuse also blows, have the

cause traced and rectified at a qualified

specialist workshop, e.g. an authorized

Mercedes-Benz Center.

394

Fuses

Breakdown

assista

nce

Advertising