Mercedes-Benz C-Sedan 2012 Owners Manual - Manual (Page 99)

Removing and installing rear head
restraints
5
G WARNING
Occupants should only travel sitting on seats
which have the head restraints installed. In
the event of an accident, this reduces the risk
of injury for passengers seated in the rear
compartment.
X Release the rear seat backrest and fold it
slightly forwards (
Y page 257).
X To remove: pull the head restraint up to
the stop.
X Press release catch : and pull the head
restraint out of the guides.
X To re-install: insert the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X Push the head restraint down until you hear
it engage in position.
X Fold back the rear seat backrest until it
engages.
Adjusting the lumbar support
You can adjust the contour of the front seats
so as to provide optimum support for your
back.
X Move adjustment lever : in the direction
of the arrow until the desired backrest
contour is achieved.
Adjusting the four-way lumbar
support
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
:
To raise the backrest contour
; To soften the backrest contour
= To lower the backrest contour
? To harden the backrest contour
Adaptive backrest (AMG vehicle)
You can adjust the contour of the front seat
backrests individually so as to provide
optimum support for your back.
5 Only for vehicles with through-loading facility.
Seats
97
Seats, steering wheel and mirrors
Z