Mercedes-Benz C-Class 2011 Owners Manual - Manual (Page 181)

X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Instr. Cluster submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Display Unit Speed-/Odometer.
function.
You will see the selected setting:
km or
miles.
X Press the a button to save the setting.
Switching the additional speedometer
on/off
Only vehicles with manual transmission have
this function.
The
Additional Speedometer: function
allows you to choose whether the
multifunction display also shows the speed in
km/h (USA) or mph (Canada).
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Instr. Cluster submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Additional Speedometer function.
You will see the selected setting:
On or
Off.
X Press the a button to save the setting.
Selecting the permanent display function
Only vehicles with automatic transmission
have this function.
The
Permanent Display: function allows
you to choose whether the multifunction
display always shows the outside
temperature or the speed in km/h (USA) or
mph (Canada).
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Instr. Cluster submenu.
X Press the a button to confirm.
X Press : or 9 to select the
Permanent Display: function.
You will see the selected setting
Outside
Temperature or Speedometer [km/h]:.
X Press the a button to save the setting.
Time/date
This submenu is only available on vehicles
with Audio 20. To set the time and date on
vehicles with COMAND, see the separate
operating instructions.
In the
Time/date submenu, you can set the
time and date.
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Time/date submenu.
X Press the a button to confirm.
X Press the : or 9 button to select
Time: or Date:.
The current time or date set is displayed.
X Press a to change the setting.
X Press the = or ; button to select the
display you want to change: hour, minute,
day, month, year.
X Press the : or 9 button to set the
selected display.
X Press the a button to store the entry.
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the
Daytime Running
Lights: function and the light switch is in the
Menus and submenus
179
On-board computer and displays
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 179
Z