System settings, Vehicle equipment, Display settings – Mercedes-Benz S-Class 2011 User Manual
Page 143: Comand
![background image](/manuals/638549/143/background.png)
Display
Status
Green
The headphones are switched
on and the batteries are fully
charged.
Red
The headphones are switched
on and the batteries are
almost discharged.
No display
(dark)
The headphones are switched
off, or the batteries are
empty, incorrectly inserted or
not inserted.
Connecting additional headphones
You can connect an additional set of corded
headphones to each rear-compartment
screen (
Changing batteries
Batteries are required for the remote control
and for the two sets of cordless headphones.
For changing batteries: (
System settings
Vehicle equipment
i
These Operating Instructions describe all
standard and optional equipment available
for your vehicle at the time of purchase.
Please note that your vehicle may not be
equipped with all features described.
Display settings
Switching the display on/off
X
Select
Vehicle
by turning cVd the
COMAND controller and press W to
confirm.
X
Select
Display off
by turning cVd the
COMAND controller and press W to
confirm.
X
To switch on the display: press W or
cVd turn the COMAND controller.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
design to suit your personal preferences by
manually selecting day or night design or opt
for an automatic setting.
X
Select
Vehicle
by turning cVd the
COMAND controller and press W to
confirm.
X
Select
System
by turning cVd the
COMAND controller and press W to
confirm.
X
Select
Display
and press W to confirm.
X
Select
Day design
,
Night design
or
Automatic
by turning cVd the COMAND
controller and press W to confirm.
The # icon indicates the current setting.
Design
Explanation
Day design
The display is set
permanently to day
design.
Night design
The display is set
permanently to night
design.
Automatic
The display design
changes depending on
the brightness around
the vehicle.
i
In the
Automatic
setting, COMAND
evaluates the readings from the automatic
vehicle light sensor and switches between
the display designs automatically.
System settings
141
COMAND
Z