Mercedes-Benz GL-Class 2011 Owners Manual - Manual (Page 229)

Trip computer menu
Trip computer "From start" or "From
reset"
The values in the From Start submenu refer
to the start of your journey, while those in the
From Reset submenu refer to the last time
you reset this submenu.
X Press V or U on the steering wheel
to select the
trip computer menu.
X Press & or * to select From Start
or
From Reset.
Trip computer "After start" (example)
:
Distance
; Time
=
Average speed
? Average fuel consumption
The From Start trip computer is reset
automatically when
R the ignition has been switched off for more
than 4 hours.
R
999 hours have been exceeded.
R
9999 miles have been exceeded.
The From Reset trip computer is
automatically reset if the trip exceeds
9999 hours or 99,999 miles.
You can select
Km or Miles as the unit of
measurement for distance ( Y page 221).
Resetting values
X Press V or U on the steering wheel
to select the
trip computer menu.
X Press & or * to select the function
that you wish to reset.
X Press and hold the . reset button on the
instrument cluster until the values have
reverted to "0".
Calling up the range
X Press V or U on the steering wheel
to select the
trip computer menu.
X Press & or * to select Range:.
The multifunction display shows the
estimated range of the vehicle, based on
the current driving style and the fuel level.
If there is only a small amount of fuel
remaining in the fuel tank, a vehicle
refueling C appears instead of the
range.
Displaying the current fuel
consumption
X Press V or U on the steering wheel
to select the
trip computer menu.
X Press & or * to select
Consumption.
The current fuel consumption is displayed.
Telephone menu
Introduction
You can establish a Bluetooth ® wireless
connection to COMAND APS (see the
separate operating instructions).
Menus and submenus
227
On-board computer and displays
BA 164.8 USA, CA Edition B 2011; 1; 2, en-US
d2sboike
Version: 3.0.3.5
2010-04-21T15:08:44+02:00 - Seite 227
Z