Approved engine oils, Technical data” section, Technical data – Mercedes-Benz E-Sedan 2010 Owners Manual User Manual
Page 363: Fuels, coolants, lubricants, etc
Model
Capacity
Fuels, coolants,
lubricants, etc.
Brake system
All models
approx. 0.53 US qt (0.5 l) MB Brake Fluid
(DOT 4+)
Cooling system E 350
E 350 4MATIC
approx. 8.9 US qt (8.4 l)
MB 325.0
Anticorrosion/
Antifreeze
E 350 BlueTEC
approx. 12.2 US qt (11.5 l)
E 550
E 550 4MATIC
approx. 10.9 US qt (10.3 l)
E 63 AMG
approx. 11.6 US qt (11.0 l)
Fuel tank
All models
21.1 US gal (80.0 l)
Gasoline engine:
Premium unleaded
gasoline (Minimum
Posted Octane 91
[Avg. of
96 RON/86 MON])
Fuel tank
reserve
All models,
except E 63 AMG
approx. 2.4 US gal (9.0 l)
E 63 AMG
approx. 3.7 US gal (14.0 l)
Air
conditioning
system
All models
—
R134a refrigerant
and special
PAG lubricant oil
(never R 12)
Washer system
and headlamp
cleaning
system
All models,
except
E 350 BlueTEC
6.3 US qt (6.0 l)
MB Windshield
Washer
Concentrate
50
Washer fluid mixing
ratio (
E 350 BlueTEC
3.7 US qt (3.5 l)
Approved engine oils
Engine oils are specifically tested for their
suitability in our engines and durability for our
service intervals. Therefore, only use
approved engine oils and oil filters required
for vehicles with the Maintenance System.
!
Using engine oils and oil filters of a
specification other than those expressly
required for the Maintenance System, or
changing of oil and oil filter at change
intervals longer than those called for by the
Maintenance System will result in engine or
emission control system damage not
covered by the Mercedes-Benz Limited
Warranty.
Please follow Maintenance System
recommendations for scheduled oil
changes. Failure to do so will result in
engine or emission control system damage
not covered by the Mercedes-Benz Limited
Warranty.
50
Mixed with water or commercially available premixed washer solvent/antifreeze.
Fuels, coolants, lubricants, etc.
361
Technical data
212_AKB; 2; 41, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T09:14:21+02:00 - Seite 361
Z