Mercedes-Benz SLR-Class 2009 - Manual (Page 228)

228
Controls in detail
Useful features
Floormats* (Only Mercedes-Benz SLR
McLaren Roadster 722S)
Installing
Example driver’s side
1 Eyelet
2 Retainer pins
̈ Lay down the floormat.
̈ Press eyelets 1 onto retainers pins 2
in direction of arrow.
Removing
̈ Pull the floormats off retainers pins.
̈ Remove the floormat.
Warning!
G
Because of the carbon fiber the footwell
could be slippery when wet. Be careful when
entering/exiting the vehicle with wet shoe
soles, you could slip on it.
When you are using floormats, make sure
there is enough clearance and that the
floormats are securely fastened.
Floormats must always be securely fastened
using eyelets 1 and retainer pins 2.
Before driving off, check that the floormats
are securely in place and adjust them if
necessary. A loose floormat could slip and
hinder proper functioning of the pedals.
Do not place several floormats on top of
each other as this may impair pedal
movement.
! To avoid damage to the carbon fiber surface
please make sure your shoe soles are free of
hard particles (e.g. stones, glass) and avoid the
use of small surface heels when driving the
vehicle.