Mercedes-Benz S-Class 2008 COMAND Manual User Manual
Page 621

620
Operation
Vehicle care
̈
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratching cloth to clean
sensors
1 on the bumpers.
Cleaning the driving systems sensors
The sensors are integrated in the front and
rear bumpers and cannot be seen from the
outside. They work with the following sys-
tems:
ț
BAS Plus*
ț
PRE-SAFE
®
Brake*
ț
Blind Spot Assist*
ț
Park Assist*
ț
Advanced Parking Guidance*
1 Bumper area near sensors
̈
Switch off the ignition (
୴
page 370).
̈
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratching cloth to clean the
bumper area near sensors.
!
Do not apply strong pressure to the sensor
covers. Applying strong pressure may damage
the sensor covers.
Follow the instructions provided by the power
washer manufacturer on maintaining a distance
between the vehicle and the nozzle of the power
washer.
!
To prevent scratches, never apply strong
force and only use a soft, non-scratching cloth
when cleaning the sensors. Do not attempt to
wipe dirty sensors with a dry cloth or sponge.
୴୴