Driving off – Mercedes-Benz S-Class 2007 User Manual

Page 362

Advertising
background image

361

Controls in detail

Driving and parking

̈

If you are starting the engine with
KEYLESS-GO: Close any doors that
may be open to allow for better detec-
tion of the SmartKey with
KEYLESS-GO.

or

̈

Remove the KEYLESS-GO* start/stop
button from starter switch.

̈

Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO.

̈

Repeat the starting procedure
(

page 359). Remember that extend-

ed starting attempts can drain the bat-
tery.

̈

Get a jump start (

page 639).

If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.

̈

Call Roadside Assistance.

̈

Notify an authorized Mercedes-Benz
Center.

Driving off

̈

Depress the brake pedal.

The gear selector lever can now be
used.

̈

Shift automatic transmission to D or R.

̈

Release the brake pedal.

̈

Carefully depress the accelerator
pedal.

The electric parking brake is automati-
cally released (

page 364).

The red brake warning

0 (USA only)

or

! (Canada only) in the instru-

ment cluster goes out.

Once the vehicle is in motion, the auto-
matic central locking system engages
and the locking knobs in the doors
move down.

After a cold start, the automatic transmis-
sion shifts at a higher engine revolution.
This allows the catalytic converter to reach
its operating temperature earlier.

i

Wait for the gear selection process to com-

plete before setting the vehicle in motion.

i

Shifting from gear position P to position R,

N, or D is only possible with the brake pedal de-
pressed. Without the brake pedal depressed, the
gear selector lever can be moved, but the park-
ing pawl remains engaged, not allowing shifting
to occur.

i

After driving off the doors and the trunk lock

automatically.

You can open a locked door from the inside.
Open door only when conditions are safe to do
so.

You can deactivate the automatic locking using
the COMAND system (

page 223).

୴୴

Advertising