Technical data:gasoline additives, Coolant, Gasoline additives coolants – Mercedes-Benz G-Class 2007 Owners Manual User Manual

Page 428

Advertising
background image

427

Technical data

Fuels, coolants, lubricants, etc.

Gasoline additives

A major concern among engine
manufacturers is carbon build-up caused
by gasoline. Mercedes-Benz recommends
only the use of quality gasoline containing
additives that prevent the build-up of car-
bon deposits.

After an extended period of using fuels
without such additives, carbon deposits
can build up, especially on the intake
valves and in the combustion area, leading
to engine performance problems such as:

ț

Warm-up hesitation

ț

Unstable idle

ț

Knocking/pinging

ț

Misfire

ț

Power loss

In areas where carbon deposits may be
encountered due to lack of availability of
gasolines which contain these additives,
Mercedes-Benz recommends the use of
additives approved by us for use on
Mercedes-Benz vehicles. Refer to the
Factory Approved Service Products
pamphlet (USA only) or contact an autho-
rized Mercedes-Benz Light Truck Center
for a listing of approved product(s). Follow
directions on product label.

Do not blend other fuel additives with fuel.
This only results in unnecessary cost and
may be harmful to the engine operation.

Coolants

The engine coolant is a mixture of water
and anticorrosion/antifreeze, which
provides:

ț

Corrosion protection

ț

Freeze protection

ț

Boiling protection (by increasing the
boiling point)

The cooling system was filled at the factory
with a coolant providing freeze protection
to approximately -35°F (-37°C) and corro-
sion protection.

If the antifreeze mixture is effective to
-35°F (-37°C), the boiling point of the cool-
ant in the pressurized cooling system is
reached at approximately 266°F (130°C).

!

Damage or malfunction resulting from poor

fuel quality or from blending additional fuel
additives other than those tested and approved
by us for use on Mercedes-Benz vehicles are not
covered by the Mercedes-Benz Limited
Warranty.

!

Add premixed coolant solution only. Adding

water and MB 325.0 Anticorrosion/Antifreeze
separately from each other, could cause engine
damage not covered by the Mercedes-Benz
Limited Warranty.

Advertising