Mercedes-Benz R-Class 2007 Owners Manual - Manual (Page 96)

95
Safety and Security
Occupant safety
Installation of infant and child restraint
system
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seat backrests.
1 Anchorage ring cover
̈ Remove anchorage ring cover 1 from
seat backrest of the seat on which a
child seat is to be installed.
2 Anchorage rings
3 Hook
̈ Move the respective head restraint to
its uppermost position (
୴ page 139).
̈ Release the respective seat backrest
(
୴ page 133).
The seat backrest folds down.
2 Anchorage ring
3 Hook
4 Top tether strap
̈ Guide top tether strap 4 between
head restraint and top of seat backrest.
i
For safety, make sure hook 3 has attached
to anchorage ring 2 beyond the safety catch, as
illustrated ( ୴ page 95). ୴୴