Mercedes-Benz SL-Class 2006 Owners Manual User Manual
Page 408
407
Practical hints
Flat tire
̈
Keeping jack in this position, turn
crank
3 clockwise until the jack base
meets the ground. Make sure the jack
is vertical (plumb line).
̈
Continue to turn the crank until the tire
is a maximum of 1.2 in (3 cm) from the
ground.
Removing the wheel
1 Alignment bolt
̈
Unscrew upper-most wheel bolt and re-
move.
̈
Replace this wheel bolt with alignment
bolt
1 supplied in the tool kit.
̈
Remove the remaining bolts.
̈
Remove the wheel.
Mounting the new wheel
̈
Clean contact surfaces of wheel and
wheel hub.
̈
Guide the spare wheel onto the align-
ment bolt and push it on.
̈
Insert wheel bolts and tighten them
slightly.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
Warning!
G
Inflate spare wheel tire only after the wheel
is properly mounted.
Inflate the spare wheel tire using the electric
page 408) before lowering the ve-
hicle.
Warning!
G
Always replace wheel bolts that are dam-
aged or rusted.
Never apply oil or grease to wheel bolts.
୴୴