Mercedes-Benz M-Class 2006 Owners Manual User Manual
Page 37
36
Getting started
Unlocking
1 KEYLESS-GO start/stop button
2 Starter switch
KEYLESS-GO start/stop button
1 USA only
2 Canada only
The SmartKey with KEYLESS-GO must be
located in the vehicle.
̈
Make sure the automatic transmission
is set to P.
̈
Do not depress the brake pedal.
Position 0
Before you press the KEYLESS-GO
start/stop button, the vehicle’s on-board
electronics have status 0 (as with
SmartKey removed).
Position 1
̈
Press the KEYLESS-GO start/stop
button once.
This supplies power for some electrical
consumers, such as seat adjustment.
Ignition (or Position 2)
̈
Press the KEYLESS-GO start/stop
button twice.
All lamps in the instrument cluster
come on. If a lamp in the instrument
cluster fails to come on when the igni-
tion is switched on, have it checked
and replaced if necessary. If a lamp in
the instrument cluster remains on after
starting the engine or comes on while
driving, refer to “Lamps in instrument
cluster” (
୴
page 382).
i
If you now press the KEYLESS-GO
start/stop button
ț
once more, the ignition (position 2)
is switched on
ț
twice more, the power supply is
again switched off