Smartkey with keyless-go*:changing, Smartkey with keyless-go – Mercedes-Benz CLS-Class 2006 Owners Manual User Manual
Page 410

409
Practical hints
Replacing SmartKey batteries
̈
Insert the mechanical key
1 in direc-
tion of arrow in side opening.
̈
Using mechanical key
1 push gray
slide
2 to unlatch battery
compartment
3.
̈
Pull the battery compartment
3 out of
the housing in direction of arrow.
4 Battery
5 Contact spring
̈
Remove the batteries
4 in direction of
arrow.
̈
Using a lint-free cloth, insert new
batteries
4 under the contact
spring
5 with the plus (+) side facing
up.
̈
Return battery compartment
3 into
housing until it locks into place.
̈
Slide mechanical key
1 back into the
SmartKey.
̈
Check the operation of the SmartKey.
SmartKey with KEYLESS-GO*
Replacement batteries: Lithium, type
CR 2025 or equivalent.
̈
Remove mechanical key (
̈
Insert the mechanical key
3 in side
opening and push grey slide
(
Battery compartment is unlatched.
̈
Pull battery compartment out of the
housing in direction of arrow
(
୴୴