Towing eye bolt, Installing towing eye bolt – Mercedes-Benz E-Class 2006 Owners Manual User Manual
Page 461
![background image](/manuals/638649/461/background.png)
460
Practical hints
Towing the vehicle
Installing towing eye bolt
Front of vehicle
1 Cover on right side of front bumper
To remove cover:
̈
Press mark on cover
1 in direction of
arrow.
̈
Lift cover
1 off to reveal the threaded
hole for towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
̈
Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
̈
Fit cover
1 and snap into place.
Rear of vehicle
2 Cover on right side of rear bumper
To remove cover:
̈
Pull cover
2 in direction of arrow.
̈
Fold cover
2 down to reveal the
threaded hole for the towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
̈
Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
̈
Fit cover
2 and snap into place.