Mercedes-Benz SLR-Class 2006 - Manual (Page 261)

260
Operation
Tires and wheels
Placard (Example A)
1 Seating capacity
Placard (Example B)
1 Seating capacity
Steps for determining correct load limit
The following steps have been developed
as required of all manufacturers under Title
49, Code of U.S. Federal Regulations, Part
575 pursuant to the “National Traffic and
Motor Vehicle Safety Act of 1966”.
Step 1 (Vehicles equipped with placard
Example A)
̈ Locate the statement “The combined
weight of occupants and cargo should
never exceed XXX kg or XXX lbs.” on
your vehicle’s placard.
Step 1 (Vehicles equipped with placard
Example B)
̈ Locate the heading “Vehicle Capacity
Weight” on your vehicle’s placard.