Mercedes-Benz CL-Class 2004 Owners Manual - Manual (Page 213)

212
Controls in detail
Driving systems
The following vehicle level settings can be
selected when the vehicle is stationary:
The switch with the indicator lamps is lo-
cated in the upper part of the center con-
sole.
1 Indicator lamps
2 Vehicle level control switch
̈ Briefly press switch 2 to change from
one level setting to the next. When ve-
hicle is at raised level 2, pressing the
switch will return the vehicle to normal
level.
The message:
ACTIVE BODY CONTROL
VEHICLE RISING!
appears in the multifunction display.
The display switches off when the vehi-
cle is raised.
Vehicle level when
stationary Use for Ride height increase
over normal Automatic lowering Indicator lamps
Normal level Normal operation None Max. approx. 0.4 in (11 mm) Both lamps off
Raised level 1 Driving with snow
chains (
୴ page 281)
Max. 0.55 in (14 mm) 1 Max. approx. 0.55 in (14 mm) One lamp on
Raised level 2 Very rough road surface
conditions Max. 0.95 in (24 mm) 1 Max. approx. 0.95 in (24 mm) Both lamps on
1 Dependent on load