Mercedes-Benz CL-Class 2003 COMAND Manual - Manual (Page 61)

53
Audio
CD operation
With the number keypad
̈ Press a number key, e.g. 2 to select
the corresponding CD.
The message “Loading CD ...” will ap-
pear if the selected magazine slot is
loaded.
Key 0 CD drive
Keys 1 - 6 magazine slots 1 to 6 of
the CD changer
No CD has been inserted:
COMAND will show the messages
ț “CD drive: No CD” or
ț “CD changer: No CD”.
In the “CD Select” menu
1 Current track and the name of the CD
playing if this was entered previously
(
୴ page 55)
2 Current CD
3 Magazine slots contains a CD
Position 0: CD drive
Position 1-6: magazine slots in the CD
changer
4 Magazine slot does not contain a CD
̈ Turn the right-hand rotary/push-button
v to highlight “CD Select” in the main
CD menu and press to confirm.
The “CD Select” menu will appear.
̈ Turn the right-hand rotary/push-button
v to highlight the desired CD and
press to confirm.
The message “Loading CD ...” will ap-
pear in 1. Playback will then begin
with track 1, the main CD menu will ap-
pear.
i
If it is not possible to play a CD selected
from the CD drive (message: “Error”),
COMAND will automatically load the
next CD in the magazine.
Other error messages ( ୴ page 60).
P82.85-9338-31US
1
4
2
5
3
6
0
2 3 4
CD Select
BEST OF SOUL, Track 2 1
i
If magazine slots are empty, it is not
possible to select them with the right-
hand rotary/push-button
v.
If you select an empty magazine slot
with a number key, e.g.
4 the message
“No CD” is displayed.