Mercedes-Benz C-Class 2001 COMAND Manual - Manual (Page 88)

86 Telephone
Introduction Audio Telephone Navigation Index
Info Services and
system settings
Switching telephone operation on
1 Status line, telephone not yet logged onto network
2 Input line for unlock code
Press , the menu for entering the unlock code will
appear.
Entering the unlock code
Use the number keys through to enter the unlock
code. Asterisks will appear in place of the digits in the
input line.
If entered code is correct and the phone is registered in
a network, the phone is ready for use.
Notes:
Your unlock code prevents unauthorized persons from
using your telephone. Be sure to memorize this code, a
three digit number, carefully.
If you enter an incorrect code, the systems returns to
the menu for entering the unlock code.
The unlock code must be entered when the telephone is
switched on for the first time (if phone is in locked
mode), but not if you switch to it from another system
(i.e. navigation).
“No Service” – This message will appear in case the
phone is not registered in a network or the network is
no longer available due to weak signal conditions.
Switching telephone operation off
The phone can be switched by pressing the button
(when connected to the coiled cord) or the button
(when in portable mode).
P82.85-6059-26
2
1