Cisco Cisco Unified Wireless IP Phone 7921G - Manual (Page 45)

Basic Call Handling
Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0 37
Tips
• To use any button to answer a call, see Changing Keypad Settings, page 72 .
• You can answer an incoming call even when the keypad is locked.
• If you were using an application or service before you answered an incoming call, your application
or service will resume after you end the call.
Ending a Call
To end a call, simply disconnect. Here are some more details.
Automatically connect to an
incoming call after a ring or
two Ask your system administrator to set
up the Auto Answer feature. After
ringing once or twice, the call
automatically connects to the handset
or headset without pressing
.
Using AutoAnswer, page 67
Answer a call on your
mobile phone or other
remote destination Set up Mobile Connect and answer
your phone.
When you enable Mobile Connect:
Your wireless IP Phone and remote
destinations receive calls
simultaneously.
When you answer the call on your
wireless IP Phone, the remote
destinations stop ringing, are
disconnected, and display a missed call
message.
When you answer the call on one
remote destination, the other remote
destinations stop ringing, are
disconnected, and a missed call
message is shown on the other remote
destinations.
Managing Business Calls
Using a Single Phone Number,
page 62
If you want to... Then...
End the call Choose , EndCall, or Options > EndCall.
Disconnect one call but preserve
another call on the same line Choose EndCall or Options > EndCall. If necessary, remove
the call from hold first.
If you want to... Then... For more information, see...