Viewing or removing conference participants, Viewing or removing conference – Cisco Cisco Unified Wireless IP Phone 7921G User Manual

Page 55

Advertising
background image

Basic Call Handling

Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0

47

Tip

If you call a secure Meet-Me conference number from a non-secure phone, your phone displays the
message, “Device Not Authorized.” For more information, see

Making and Receiving Secure Calls,

page 58

.

Viewing or Removing Conference Participants

During a standard (ad hoc) conference, you can view a list of participants and remove participants.

If you want to...

Then...

Start a Meet-Me conference

1.

Obtain a Meet-Me phone number from your system administrator.

2.

Distribute the number to participants.

3.

When you are ready to start the meeting, choose Options >
MeetMe.

4.

Dial the Meet-Me conference number.

5.

Press

.

Participants can now join the conference by dialing in.

Note

Participants hear a busy tone if they call the conference before the
initiator has joined. In this case, participants must call back.

Join a Meet-Me conference

1.

Dial the Meet-Me conference number (provided by the conference
initiator).

2.

Press

.

Note

You will hear a busy tone if you call the conference before the
initiator has joined. In this case, try your call again.

End a Meet-Me conference

All participants must hang up.

The conference does not automatically end when the conference
initiator disconnects.

If you want to...

Then...

View a list of conference
participants or remove
participants

1.

Press

to select an active conference.

2.

Choose Options > ConfList.

Participants are listed in the order in which they join the
conference with the most recent additions at the top.

Get an updated list of
participants

While viewing the conference list, choose Options > Update.

Advertising