ProgressiveRC 6S PowerLog - Manual (Page 17)

-17-
Multifunctional Monitor & Logger PowerLog 6S
BEEP TONE
Key Tone

Hint Tone
Alarm Tone
Brightness
-
■■■■■■
+
Contrast
-
■■■■■■
+

Motor KV Meter: Select【Motor KV Meter】, press < > and the screen shows:
Press <▲> for 3 seconds, the number of mode begins blinking, and
then press <▲> / <▼> to adjust the value. Press < > to confirm and
return.
Press <▼> for 3 seconds, the number of magnet poles begins
blinking, and then press <▲> / <▼> to adjust the value. Press < > to
confirm and return.
Setting range
MODE: 0,1
POLES:2-90 step:2
Motor voltage:0.05-28V

System Settings: Select【System…】, press < > and the screen shows:
<▲> or <▼> to select items, press < > button to confirm, press < >
for more than 3 seconds to return.
See details below.
1. Temperature Unit Settings: Select 【Temp. Unit】, press < > and the screen shows:
<▲> or <▼> to select the items , press < > button to confirm and the
item will be with ⊙ , press < > for more than 3 seconds to confirm the
amendment and return.
Select【Celsius(C)】, the temperature unit is Celsius (℃.)
Select【Fahrenheit(F)】, the temperature unit is Fahrenheit(
o F).
2. Beep Tone Settings: Select【Beep Tone】, press <
> and the screen shows:
<▲> or <▼> to select the items, and press < > to shift select /,
press < > for 3 seconds to confirm the amendment and then return.
Select【Key Tone】,the buttons tone open.
Select【Hint Tone】,the status tone open.
Select【Alarm Tone】,the alarm tone open. （have a ―Do‖ every 4
seconds）
3. LCD Brightness & Contrast Settings : Select【LCD Screen】, press <
> and the screen shows:
<▲> increase, <▼> decrease, and press <> to shift
Brightness/Contrast, press <> for 3 seconds to confirm the
amendment and then return.
SYSTEM SETTING
Temp. Unit

Beep Tone
LCD Screen
Alarm Setting
Log Start
Timer Start
Rec. Interval
Start...
Power Save
TEMPERATURE UNIT
⊙Celsius(C)

○Fahrenheit(F)
<▢>
>3 Seconds
00
<▼>
>3 Seconds
07
MODE 00 POLES 07
KV
00953
RPM 05747 U 06.03V
number of
magnet poles
KV value
Motor voltage RPM
Mode