QOMO QRF700 V7 - Manual (Page 3)

6. Instructor Login
This process may also be completed after step 3.
From the main menu (F6-6a), push the Login soft
key, and the class info screen will appear. Press
OK. The exam will initiate on the computer and
on the students’ screen.
7. Student Login
From the main menu (F7-7a) select Menu. Scroll
and select SET STUDENT ID. Delete the default
student ID, and change it to correspond with the
Student ID in the selected class. Click OK. Again
from the main menu (F7-7a), select Login and the
class info screen will appear.
8. Run a Quiz
a. Click the Start button (F2-2d) in the Tools
section to choose a quiz mode. A quiz setting
window will pop up.
Note: The QClick toolbar will appear and
shows “QRF700 Connected”. If the toolbar
shows “No Host”, re-plug the USB dongle.
b. Select a class from class list drop-down list in
the quiz setting window.
c. Click the check boxes necessary for your
session.
d. Click Start (F8.1-8a) to run a quiz.
e. A (F8.2-8b) toolbar will appear on the top of
the screen from which you can operate your
exam. On the left side of the screen a (F8.2-8c)
list of student registration numbers will appear.
On the right side of the screen a (F8.2-8d) timer
will show the response time to the questions.
f. Start any question by clicking Start (F8.3-8e),
and end the timer by clicking Stop (F8.3-8e).
Go through the questions using the arrow keys.
g. Add questions during the quiz session by
clicking the Instant Questions button (F8.3-8f).
Select a question mode from its option menu
and edit the question in in the Add a Question
window.