Setting up the unit, Making connections – QOMO QD700 User Manual
Page 2
Advertising
Turn off all power while setting up and making connections.
SETTING UP THE UNIT
1. Use one hand holds the base of the visualizer, use the other
hand carefully lift up the camera stand of the unit.
2. Open the arm lights and rotate the camera head until they are in
proper positions.
Arm lights
MAKING CONNECTIONS
Before making any connection, turn off all the power, including
power of the visualizer and the equipment to be connected.
Step 1: Connect power source.
First connect the power cord to the 12V IN connector.
Advertising