QOMO QD3800 - Manual (Page 14)

13
VIDEO VIDEO VIDEO VIDEO INPUTS INPUTS INPUTS INPUTS
Press the “S-VIDEO/VIDEO” button to switch between S-Video and
composite video signals.
RGB RGB RGB RGB INPUTS INPUTS INPUTS INPUTS
Use the “CAM/PC1/PC2” button to switch between Camera and different
RGB signals. Each time the “CAM/PC1/PC2” button is pressed, it provides
seamless transitions among different sources such as Camera,
COMPUTER (IN), and RGB (IN).
Notes: RGB OUT always outputs RGB IN signals.
PROJECTOR PROJECTOR PROJECTOR PROJECTOR ON/STANDBY ON/STANDBY ON/STANDBY ON/STANDBY
Press the “POWER” button to turn on the visualizer’s power and press the
“Ppw” button to turn the projector power on. To place the projector on
standby after the use, press the “Ppw” button and hold for more than 2
seconds. (Using the remote control, press the “PROJECTOR POWER”
button)
PROJECTOR PROJECTOR PROJECTOR PROJECTOR INPUTS INPUTS INPUTS INPUTS SELECTION SELECTION SELECTION SELECTION
When the projector is connected to several input sources, use the “Pin”
button to switch between projector signal inputs. (Using the remote control,
press the “PROJECTOR INPUT” button)
IMAGE IMAGE IMAGE IMAGE ROTATION ROTATION ROTATION ROTATION
In order to rotate the image, press the “Rot” button once, the displayed
image will be rotated clockwise. Continue to press the “Rot” button to
restore the image to its initial position.
IMAGE IMAGE IMAGE IMAGE REVERSION REVERSION REVERSION REVERSION
To display a vertically mirrored image, press the “MIRROR” button. Press
the “MIRROR” button again to exit.