CREATIVE NX Pro - Manual (Page 12)

Installing Creative WebCam NX Pro 1-2
Installing Creative
WebCam NX
Pro Follow the installation procedures for your operating system.
In Windows 98/98SE /
Me/2000/ XP 1. Do not connect Creative WebCam NX Pro to your computer before installing the drivers. If you
accidentally begin installation with Creative WebCam NX Pro connected, the Add New Hardware
Wizard or Found New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the Creative WebCam NX Pro Installation CD into your CD-ROM drive. If it does not run
automatically, click Start -> Run and type d:\ctrun\ctrun.exe (replace d:\ with the drive letter of
your CD-ROM drive).
3. Click the options for installing drivers and applications.
4. Follow the instructions on the screen to complete the installation.
You may be asked, after an application is installed, if you want to restart your computer. Select No
until all the drivers and applications are installed.
• You can install the
WebCam with your
computer turned on.
• The USB port(s) on your
computer may be found
on the front panel and/or
the back panel.
• You can attach the
WebCam to a USB hub
with an external power
supply.