Chicago Electric 18 Volt NiCd Quick Charger 68859 - Manual (Page 6)

Page 6 For technical questions, please call 1-800-444-3353. Item 68859
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Unplug the Charger from its electrical outlet before performing
any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3. NiCd BATTERY MUST BE RECYCLED
OR DISPOSED OF PROPERLY.
Do not short, incinerate or open battery.
4. WARNING! If the supply cord of this
Charger is damaged, it must be replaced
only by a qualified service technician.
Record Product’s Serial Number Here:
Note: If product has no serial number,
record month and year of purchase instead.
Note: Replacement parts are
not available for this item.