Sage Kinetix Control BBL605UK - Manual (Page 12)

11
oPeratIng yoUr neW aPPLIanCe
fUnCtIon Programmed tIme
Smoothie 60 seconds (1 minute)
Ice/Crush 60 seconds (1 minute)
When ‘00’ seconds is reached, the blender
will automatically cease to operate and
the function button and STOP button
illumination will go out. The POWER button
will illuminate and flash.
note
The smoothie function has a unique
processing technique that blends the
denser ingredients at a lower speed,
then increases as ingredients thicken.
This may happen several times while
blending smoothies.
To stop blending at any time, press the
STOP button or the selected function
button. The POWER button can also be
pressed, but this will also turn the appliance
off and all illuminations will go out.
The maximum amount of ice cubes
the blender can blend at any one time is
1 standard ice tray or 250g.
WARNING
Never place anything other than food
and liquids in the blender whilst the
motor is running.
9. For ingredients that require short
bursts of power, select the PULSE
function. The PULSE button will
illuminate and remain illuminated
while the button is depressed.
When this function is selected, the
LCD timer screen will illuminate
and count upwards in one second
increments during pulsing. Press the
‘PULSE’ button in short bursts until
blending is complete.
note
Use the PULSE button when the
food that is being processed is too
thick or coarse to circulate within the
blender jug.
10. At the end of use, always ensure the
blender is turned off by pressing the
POWER button on the control
panel. Then switch the appliance off
at the power outlet and unplug the
cord. Ensure the motor and blades
have completely stopped before
attempting to move the appliance, or
when the blender is not in use and
before disassembling, cleaning and
storing.
note
• During the blending process,
ingredients may stick to the sides
of the blender jug. To push the
food back onto the blades, press
the POWER button on the control
panel and switch off at the power
outlet and remove the power cord.
Remove the lid and use a plastic
spatula to scrape down the sides
of the jug. Replace the lid before
recommencing blending.
• If any moisture or liquid appears
on top of the motor base during
blending, press the POWER button
on the control panel, switch off at
the power outlet and remove the
power plug. Remove the blender jug.
Wipe the motor base immediately
with a dry cloth or paper toweling to
absorb the liquid. Check the blender
jug is correctly assembled.
• Never place anything other than
food and liquids in the blender
whilst the motor is running.