Curtis ENABLE 40 - Manual (Page 31)

25 Curtis enAble ® 40-Series Manual, Rev. B
5 — PROGRAMMABLE PARAMETERS: Speed Mode Parameters
☞
The Speed Mode menu allows the therapist, dealer, or OEM to set the number
of modes that can be selected by the user and by the attendant, and the speed
limit of each mode.
It is important to note that the speed limit setting works like a speed
pot. It adjusts the drive and turn speed and response as a linear interpolation
from the min and max parameters set in the profile (for parameters set in the
profile, see the Drive and Steer menus, pages 21 and 22). Speed, acceleration,
and deceleration are all affected by the Speed Mode.
Example:
Profile 1 is active, and has the following parameters:
Fwd Max Speed = 100%
Fwd Min Speed = 20%
Turn Accel High Speed = 80%
Turn Accel Low Speed = 60%
The selected Speed Mode is set at 50%.
The resultant drive and steer conditions would therefore be:
Forward Speed = (100% - 20%) * 50% + 20% = 60%
Turn Acceleration = (80% - 60%) * 50% + 60% = 70%
SPEED MODE MENU
PARAMETER RANGE DESCRIPTION
Number of Modes 2–9 Number of speed modes that can be accessed by the user.
Speed 1 0–100 % Speed limit setting for Speed Mode 1.
Speed 2 0–100 % Speed limit setting for Speed Mode 2.
Speed 3 0–100 % Speed limit setting for Speed Mode 3.
Speed 4 0–100 % Speed limit setting for Speed Mode 4.
Speed 5 0–100 % Speed limit setting for Speed Mode 5.
Speed 6 0–100 % Speed limit setting for Speed Mode 6.
Speed 7 0–100 % Speed limit setting for Speed Mode 7.
Speed 8 0–100 % Speed limit setting for Speed Mode 8.
Speed 9 0–100 % Speed limit setting for Speed Mode 9.
Attendant Speed 1 0–100 % Speed limit setting for Attendant Speed Mode 1.
Attendant Speed 2 0–100 % Speed limit setting for Attendant Speed Mode 2.