SINGER ESP18 ELECTRONIC STEAM PRESS - Manual (Page 5)

3
ENG
GETTING TO KNOW YOUR STEAM PRESS
1. The
ON/OFF Switch.
2. The Locking Knob locks the Pressing Plate and the
Ironing Board together. This allows for carrying and
storage of the unit.
3. The Pressing Handle is used to safely raise and lower the
Pressing Plate, and to carry the unit..
4. The Steam Burst Buttons are located on either side of
the Pressing Handle, produce a powerful burst of steam
when pressed.
5. The Water Reservoir should be pulled forward in order to
fill water.
6. The Ironing Board is the padded surface that holds the
fabric during pressing. The fabric cover can be removable,
and it can be washed.
7. The Pressing Plate is the temperature-controlled surface
that heats and presses the fabric.
8. The Power Indicator Light illuminates when On/Off
Switch is set to the ”On” position, providing you with a
clear visual indication that the unit is powered on.
9. The Heating Light illuminates while the unit is heating to
the selected temperature.
26. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting
away. Loop cord loosely around appliances when storing.
27. This appliance must be grounded. Do not alter the plug or attempt to defeat this
feature.
28. Before plugging in the steam press, be sure the electrical information on the label
agrees with your power supply.
WARNING: IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE
MANUFACTURER, ITS SERVICE AGENT OR A SIMILARLY QUALIFIED PERSON IN
ORDER TO AVOID A HAZARD.
SAVE THESE INSTRUCTIONS
15
14 13
12
11
10
9
8
16
1
2
3
4
5
6
7
ESP18_Instruction Manual_US.indd 3 10/11/2012 6:08:55 PM